A:A: Installation dimensions of the pressure head and equipment, the height of the pressure head, installation dimensions of the mold frame and equipment, and the required dimensions for the installation location.
A:A: Currently, the weight varies considerably depending on the brick sample, so there is no approximate weight. If needed, please provide the corresponding brick sample and machine model, and we will consult our past mold designs to estimate the weight.
A:A: This is used to position the mold frame and the main machine. Some equipment with airbag clamping does not have a fabric feeding machine. Without this positioning groove, the mold frame will shift. For equipment with a fabric feeding machine, this positioning groove can reduce the impact of the mold frame on the fabric feeding machine during fabric feeding.
A:A: The extra platform is to reduce material leakage from the material cart. We will balance the weight according to the size and structure of the mold frame, trying to keep the center of gravity close to the center of the forming area.
A:A: Yes, it will affect the strength of the mold, especially with large bricks. If the customer's material has large particles or uneven distribution, it can cause localized deformation of the crossbeams.
A:A: It can be done if the customer strongly requests it. Special supports require machining, which will affect cost and delivery time.
