When it comes to shaping consistent, high-strength concrete blocks, the block mould stands at the core of the production line. Our industrial-grade solutions share the same robust design philosophy as our brick mould, a tool trusted for its exact dimensional control and long-lasting edge retention. For operators who use interchangeable terminology, the brick mold variant offers the same mounting pattern and cavity geometry, ensuring a direct fit into existing press setups. When lighter handling or rapid cycle times are a priority, many facilities complement their main tooling with a block mold, which maintains tight tolerances while reducing overall carriage weight. For projects requiring exceptional abrasion resistance and extended service intervals, the concrete block mould is built with reinforced wear strips and a hardened core, making it a go-to choice for high-volume pavers, hollow blocks, and solid units alike.
The <产品名字> is manufactured from heat-treated alloy steel that resists deformation under repeated compaction forces. Every cavity undergoes ultrasonic inspection to eliminate micro-cracks before final assembly. This attention to detail guarantees that the finished block dimensions remain within ±0.5 mm even after thousands of cycles. Independent lab tests confirm that the surface finish of blocks produced with the <产品名字> requires no secondary smoothing, which reduces post-processing labour by up to 20%.
| Parameter | Standard Block Mould | Heavy-Duty Concrete Block Mould |
|---|---|---|
| Base Material | 42CrMo alloy steel | Hardox 450 / NM450 wear-resistant steel |
| Heat Treatment | Quenching + tempering, 50–55 HRC | Through-hardened, 58–62 HRC |
| Max. Cavity Pressure | 120 kN | 180 kN |
| Typical Block Size Range | 390×190×190 mm (hollow) or 200×100×60 mm (paver) | Up to 400×200×250 mm reinforced units |
| Weight (Single Cavity) | 12–15 kg | 16–22 kg |
| Cycle Life Expectancy | 800,000–1,200,000 cycles | 1,500,000+ cycles |
| Applicable Standards | EN 1339, GB/T 28635 | ASTM C936, EN 12620 |
| Customization Options | Logos, surface textures, chamfer profiles | Embedded RFID tags, anti-stick coating |
